You’ll find the Garrett Pro-Pointer AT offers waterproof reliability to 20 feet, 360-degree detection coverage, and proportional audio-vibration feedback that intensifies as you approach targets. It operates on a single 9V battery providing up to 30 hours runtime, features three adjustable sensitivity levels, and includes a scraping blade plus LED flashlight. The device weighs 6.5 oz., detects at 11.5 kHz frequency, and maintains an IP68-rated seal for shallow-water hunting. The sections below detail setup procedures, maintenance protocols, and advanced operational techniques.
Key Takeaways
- Fully waterproof to 20 feet with IP68-rated battery compartment; powered by single 9V battery providing 8-30 hours depending on type.
- Features proportional audio and vibration feedback that intensifies with target proximity, plus 360° side-scan detection at 11.5 kHz frequency.
- One-button control cycles through three sensitivity levels and two detection modes; settings save automatically between power cycles.
- Includes integrated LED flashlight, molded scraping blade, depth rulers, belt holster, and pre-installed battery for immediate use.
- Automatic lost alarm activates after 5 minutes of inactivity; auto-off after 60 minutes conserves battery during extended field operations.
Waterproof Performance and Submersible Design
You’ll need to maintain the O-ring seal with silicone grease and keep battery cap threads clear of debris.
Don’t use abrasive cleaners—simple soap and water preserve the seal integrity.
The unit’s environmental protection withstands hand washing for routine maintenance, and its patented scraping blade works effectively for sifting soil underwater during recovery operations.
The Pro-Pointer AT is fully waterproof to 20 feet, making it suitable for shallow water hunting and recovery in streams, lakes, and surf zones.
The bright orange color provides enhanced underwater visibility when searching in murky or low-light water conditions.
Advanced Detection Technology and Target Sensing
The Pro-Pointer AT’s detection system employs patented proportional audio and vibration technology that increases in intensity as you approach your target, providing real-time feedback for precise location.
You can select from three adjustable sensitivity levels to optimize detection based on your hunting conditions—from rejecting interference in trashy areas to achieving maximum sensitivity for tiny gold nuggets.
The unit’s 360° side-scan detection field ensures thorough coverage around the probe’s circumference, while the pinpointing tip delivers concentrated detection when you need exact target positioning. Operating at 11.5 kHz frequency, the device provides reliable metal detection for both ferrous and non-ferrous targets. The pinpointer is waterproof up to 10 feet, making it suitable for both freshwater and saltwater searching environments.
Proportional Audio/Vibration System
As your Pro-Pointer AT’s tip approaches a buried target, its proportional audio and vibration system delivers real-time feedback that intensifies with proximity. This patented technology shifts from intermittent pulses to a continuous solid tone when you’re directly over your target, giving you precise audio calibration without guesswork.
Your feedback options include:
- Audio-plus-Vibrate Mode – Simultaneous audible tones and haptic pulses for standard hunting conditions
- Vibrate-only (Stealth Mode) – Silent operation with vibration clarity for discretion in public spaces
- Dual-tone Alerts – Beep/vibrate combinations signal mode changes and low battery warnings
The 360° detection field spans from the device’s middle to its tip, with maximum small-target sensitivity occurring at the side, ½ inch from the tip. The system provides accurate detection from any angle, ensuring consistent performance regardless of your search approach. The proportional alert system excels at detecting small targets like gold nuggets with precision and reliability.
You’ll distinguish multiple targets from single large objects through response variations.
Three Sensitivity Level Settings
Matching your detection needs to soil conditions and target types requires command of the Pro-Pointer AT’s three-tier sensitivity system.
Sensitivity adjustment begins by holding the button for two seconds until you hear entry confirmation. Press once more to identify your current level—one, two, or three beeps indicate minimum, medium, or maximum sensitivity respectively.
Each press cycles through audio modes before shifting to silent vibration equivalents.
Maximum sensitivity extends detection to 4-4.5 inches but increases vulnerability to mineralized soil interference.
False signal reduction demands lowering sensitivity in trashy or rocky environments where medium or minimum levels maintain stability. The system wraps around from level three back to level one when cycling through adjustment options.
Your settings persist through power cycles, allowing consistent field performance.
Higher sensitivity proves valuable for small or deep targets, while lower settings work best in mineralized ground conditions.
Exit adjustment mode by holding the button or waiting five seconds for automatic confirmation.
360° Side-Scan Coverage
- Detection radius extends ½ inch from device sides for ideal small target acquisition across all horizontal directions.
- Flat-side scanning technique enables rapid soil composition assessment by holding the unit horizontally against ground.
- Integrated scraping blade synchronization permits simultaneous excavation and detection during recovery operations.
The system’s Fast Retune function adjusts sensitivity for mineralized environments, while proportional audio and vibration feedback intensify as you approach targets. The 360-degree side scan detection capability ensures comprehensive coverage around the entire probe circumference, eliminating blind spots during target location. The bright orange color enhances visibility during underwater detection operations and field recovery.
You’ll shift from broad side-scan coverage to precision tip-based verification, reducing search time and maximizing field efficiency.
Ergonomic Build and Physical Features
The Pro-Pointer AT’s compact 9-inch (22.9 cm) frame delivers precision without bulk, tapering from 1.5 inches (3.8 cm) at the handle to 0.875 inches (2.2 cm) at the detection tip. This ergonomic grip enables confident single-handed operation through the integrated one-button control system, managing power, sensitivity, retune, and silent mode functions.
At 6.5 oz. (0.2 kg) with battery installed, you’ll experience minimal fatigue during extended recovery sessions.
Lightweight 6.5 oz. design ensures comfortable handling throughout prolonged detection work without hand strain or fatigue.
The physical design prioritizes field utility: a molded ruler displays both imperial and metric measurements, while the lanyard loop and included belt holster guarantee secure carry. The brilliant orange chassis maintains visibility in challenging conditions, complemented by an integrated LED flashlight.
A sealed battery compartment preserves the ergonomic profile while maintaining the IP68 waterproof rating to 20 feet.
Power Management and Battery Efficiency
Powered by a single 9V battery, your Pro-Pointer AT delivers exceptional operational longevity that adapts to your battery choice and field demands. Alkaline batteries provide 30 hours of runtime, carbon batteries yield 16 hours, and rechargeable options offer 8 hours—double the battery longevity of comparable LED-equipped pinpointers.
Smart Power Conservation Features:
- Low Battery Indicator – Alternating dual-tone alarm activates before complete power loss, ensuring you’re never caught without warning.
- Lost Pinpointer Alarm – Triggers after 5 minutes of inactivity with progressively faster chirps for 60 minutes, preventing unnecessary drain.
- Auto-Off Function – Shuts down automatically after the alarm sequence completes, maximizing battery efficiency.
For storage exceeding 30 days, remove the battery to preserve charge.
Access the battery compartment by rotating the end cap counterclockwise—simple, tool-free maintenance that keeps you field-ready.
User Controls and Operation Modes
Mastering your Pro-Pointer AT’s control interface begins with proper power-on procedure—press and release the single button while holding the device away from metallic objects. You’ll hear two beeps with white LED confirmation. Power off requires holding the control button for half to one second.
Access adjustment mode by pressing and holding for two seconds—you’ll receive distinct audio feedback through the user interface.
Within five-second windows, cycle through six settings: three sensitivity levels (minimum, medium, maximum) across two detection modes (Audio-plus-Vibrate or Silent). Medium sensitivity provides ideal balance as your factory default.
The control buttons allow seamless shifts between configurations. Exit adjustment mode by holding two seconds or wait for automatic timeout.
Your settings persist until you modify them again.
What’s Included in the Box
When you open your Pro-Pointer AT package, you’ll find the pinpointer unit itself equipped with an exclusive scraping blade, molded ruler, and lanyard attachment loop.
The included woven belt holster secures the device for immediate field access during detection operations.
A factory-installed 9V PP3 battery powers the unit right out of the box, eliminating setup delays.
The Pinpointer Itself
Upon opening the Pro-Pointer AT box, you’ll find a fully assembled pinpointer ready for immediate field use, complemented by a pre-installed 9-volt alkaline battery and extensive documentation covering operation and warranty details.
The device’s aesthetic design features distinctive orange coloring that enhances underwater visibility while providing material durability through its waterproof construction rated to 20 feet.
At 6.5 ounces, you’ll appreciate the lightweight yet robust housing during extended detection sessions.
Key physical features include:
- Integrated LED flashlight for low-light operations in caves, dense foliage, or nocturnal detecting
- Patented scraping blade molded into the housing for efficient soil removal during target recovery
- Depth measurement ruler with inch and centimeter markings for precise excavation planning
The molded lanyard loop ensures you won’t lose your equipment during challenging recoveries or underwater searches.
Protective Belt Holster
The Pro-Pointer AT ships with a factory-supplied woven holster that secures the device to standard-width belts during field operations. This tapered design conforms to your pinpointer’s profile, maintaining hands-free accessibility while you’re detecting.
The holster’s metal snap mechanism doubles as a safety feature—it’ll trigger an alarm if you holster a powered-on unit, preventing accidental activation during transport.
Belt mounting options give you positioning flexibility on either hip, accommodating your dominant-hand preference.
You’ll also find compatibility with digging pouches and direct detector attachment.
The durable construction resists impacts and abrasions, protecting your investment throughout extended sessions.
While holster customization remains limited to positioning choices, the scratch-resistant material preserves your pinpointer’s finish during harsh field conditions without restricting quick-draw capability when targets appear.
Power Source Included
Your Garrett Pro-Pointer AT arrives field-ready with a factory-installed 9V battery, eliminating setup delays and ensuring immediate operational capability straight from the box. This standard power source delivers exceptional power durability through intelligent energy management features that outperform competing pinpointers.
Battery compatibility extends across the entire Pro-Pointer series:
- Powers all detection modes, LED flashlight, and proportional audio/vibration systems simultaneously.
- Automatic 5-minute power-off conserves energy during forgotten shutdowns.
- 60-minute lost alarm with periodic chirps prevents complete battery depletion.
The included 9V provides twice the operational life of LED-equipped alternatives while supporting three sensitivity levels and 360° detection capabilities.
Your single-button interface manages power functions efficiently, backed by Garrett’s 3-year warranty coverage for power-related components.
No additional purchases required—you’re hunt-ready immediately.
Technical Specifications and Operating Conditions
Understanding your Pro-Pointer AT’s capabilities starts with its core technical foundation. Operating at 11.5 kHz frequency, you’ll detect targets across extreme temperature ranges from -35°F to 158°F.
The material durability shows in its IP68 waterproof rating—fully submersible to 20 feet—while the ergonomic design delivers 360° side-scan detection through its 9-inch tapered body.
You’ve got three sensitivity levels at your command, adjustable through single-button operation. The fast retune function eliminates interference from mineralized ground, salt, and wet sand instantly.
Your unit’s proportional audio and vibration intensify as you close in on targets. The orange housing ensures visibility in murky water, and the molded ruler provides immediate measurement capability.
Operating temperature tolerances guarantee performance whether you’re detecting desert claims or frozen ground.
Warranty Coverage and Support
Your warranty registration activates these critical protections:
- Factory-authorized repairs at no charge when equipment fails to meet performance specifications.
- 90-day repair warranty on all completed service work.
- Direct customer service access through Garrett.com registration pages.
Note that batteries, abuse damage, unauthorized repairs, and normal wear aren’t covered. You’re responsible for return shipping after 90 days.
International owners must contact local representatives before shipping. Register immediately to secure your full warranty benefits and maintain your detecting freedom.
Frequently Asked Questions
Can the Garrett Pro-Pointer at Detect Gold Nuggets Specifically?
Like a treasure hunter’s compass pointing toward fortune, you’ll find gold nuggets as small as 0.25 grams. Its maximum metal sensitivity setting provides exceptional gold detection capabilities, letting you chase your prospecting dreams with proven technical precision.
How Deep Can the Pinpointer Accurately Detect Small Metal Objects?
You’ll achieve metal detection depth accuracy of 2-3 inches on small objects in typical soil conditions. On high sensitivity, you can detect coins up to 4 inches during air tests, though real-world performance decreases in mineralized ground.
Is the Device Compatible With Third-Party Holsters and Carrying Cases?
You’ll find excellent holster compatibility across multiple brands—universal designs from GFS, Nokta, and Minelab fit your Pro-Pointer AT perfectly. Carrying case options include belt holsters, shaft mounts, and tactical light holders, ensuring you’re never restricted in transport methods.
Does the Lost Alarm Function Drain the Battery Significantly?
No, the lost alarm won’t substantially drain your battery life. It chirps for only 60 minutes before auto-shutoff, minimizing power consumption. You’ll maintain the advertised battery life with proper use, keeping you detecting independently longer.
Can Sensitivity Levels Be Adjusted While Underwater During Detecting?
Yes, you can adjust sensitivity levels while underwater during detecting. The depth adjustment process works identically submerged as on land, with no restrictions noted. Your underwater sensitivity settings remain fully operational and adjustable at depths up to 20 feet.
References
- https://tritechforensics.com/garrett-pro-pointer-at-metal-detector/
- https://bigboyshobbies.net/garrett-pro-pointer-at
- https://garrett.com/garrett-pro-pointer-at/
- https://seriousdetecting.com/blogs/detecting-prospecting/garrett-pro-pointer-comparison
- https://garrett.com/sites/default/files/2019-11/1538800_propointer_at_english.pdf
- https://spinadiscmetaldetectors.com/products/garrett-pro-pointer-at-waterproof-pinpointer
- https://www.mysurveyingdirect.com/products/garrett-pro-pointer-at
- https://kellycodetectors.com/garrett-pro-pointer-at-waterproof-pinpointer-with-z-lynk/
- https://www.youtube.com/watch?v=1po7O40EhdI
- https://highbanker.com.au/products/garrett-pin-pointer-pro-at-waterproof-6m
