You’ll find Garrett offers Z-Lynk wireless headphones with 17ms latency and auto-pairing transmitters, plus wired models featuring 1/4″, 2-pin, or 1/8″ connectors matched to your detector’s socket. Wireless units fold flat and recharge via micro-USB in five hours, while wired options include waterproof models rated to 200 feet for submersible detecting. Both deliver 30-18,000 Hz frequency response through 8-ohm speakers. Setup requires verifying connector compatibility—adapters enable cross-platform use, though underwater operation demands wired connections. The specifications below detail power management, depth ratings, and detector-specific pairing protocols.
Key Takeaways
- Garrett offers wireless Z-Lynk headphones with 17 ms latency and wired models with various connectors: 1/4″, 2-pin AT, and 1/8″.
- Wireless headphones feature factory-paired modules, auto-on/off functions, fold flat design, and recharge fully via micro-USB in 5 hours.
- Wired headphones include MS-2, ClearSound Easy Stow, and Vortex series, offering waterproof options rated from 10 ft to 200 ft.
- Connector compatibility depends on detector socket type; adaptors enable cross-compatibility between 1/4″, 2-pin, and 1/8″ jacks.
- Setup requires matching headphone connector to detector jack or using adapters; wireless models auto-pair with compatible Z-Lynk detectors.
Understanding Z-Lynk Wireless Technology and Performance
Factory-paired transmitter and receiver modules eliminate complex setup procedures.
You’ll simply switch both units on simultaneously if re-pairing becomes necessary.
The system’s auto-on feature activates the transmitter when you power up your detector, streamlining your workflow in the field.
Z-Lynk technology delivers audio signals with a near-zero delay of just 17 milliseconds for responsive target detection.
When not in use, an auto-off function powers down the system after 30 minutes of inactivity to conserve battery life.
MS-3 Wireless Headphone Specifications and Benefits
The MS-3 wireless headphones deliver audio signals with a 17-millisecond delay—six times faster than Bluetooth’s typical 100+ millisecond latency.
This Z-Lynk technology operates on the 2.4 GHz band with frequency hopping, preventing crosstalk while you’re detecting alongside other operators.
You’ll receive premium audio through 8-ohm speakers spanning 30-18,000 Hz frequency response.
The adjustable volume control lets you optimize signal levels for weak targets or match your hearing requirements.
Headphone ergonomics support extended detection sessions through comfortable full-ear cushions and an adjustable headband.
The 12-ounce unit folds compactly for transport and features IP52 water resistance for light rain protection.
Battery performance provides 30 hours per charge with 5-hour recharge times.
Auto power-off activates after 60 minutes of inactivity, conserving power during breaks.
The headphones work with AT Max, AT Max International, and Z-Lynk Wireless Kits, ensuring broad detector compatibility.
The foldable design allows for convenient storage when traveling between detecting locations.
Wired Headphone Models and Connector Types
Garrett’s wired headphone lineup offers three primary connector configurations: 1/4″ standard jacks, 2-pin AT connectors for underwater models, and 1/8″ specifications for Vortex series compatibility.
You’ll select connector types based on your detector model and operating environment, with cable-based transmission eliminating wireless latency and battery dependency.
The MS-2, ClearSound, and submersible variants deliver frequency ranges optimized for metal detection signals while maintaining consistent 8-ohm impedance across standard models.
The MS-2 features a reinforced spiral cable that extends from 90 to 300 cm, providing exceptional freedom of movement during search operations.
Enhanced comfort during extended detection sessions is achieved through padded headbands and full-size ear muffs that simultaneously reduce ambient noise interference.
Standard Connector Compatibility Options
When selecting wired headphones for your Garrett detector, connector compatibility determines which models will integrate with your equipment’s audio output architecture.
The MS-2 headphones deliver precise 30-18,000 Hz frequency response through 8-ohm speakers. They are available with either standard 1/4″ jack or 2-pin AT connector configurations.
Your detector’s socket type dictates which version you’ll need—AT Pro, AT Gold, ATX, and Sea Hunter models require 2-pin connections, while legacy detectors utilize 1/4″ inputs.
Alternative connector options exist when your preferred headphones don’t match your detector’s socket. The Garrett 1/4″ to AT adapter enables cross-compatibility, though you’ll need 10,000-ohm impedance or lower for automatic speaker disabling.
Adapter compatibility extends to non-Garrett headphones, potentially requiring internal resistor installation. Z-Lynk cables provide additional conversion pathways, ensuring you’re not restricted by factory connector limitations. The reinforced 10-foot coiled cord includes a right-angle connector that prevents tangling during detection activities. The adapter is designed exclusively for land-use applications and should not be submerged during underwater detection.
Model-Specific Wired Headphones
While connector compatibility establishes the foundation for headphone selection, specific Garrett wired models deliver distinct audio architectures optimized for different detection scenarios.
You’ll find the MS-2 offers 30-18,000 Hz frequency response with adjustable volume control and reinforced 10-foot coiled cord—headphone durability engineered for sustained field operations.
The ClearSound Easy Stow provides portable functionality with 82-inch extended reach, while maintaining lightweight construction for unrestricted movement.
For submersible applications, you’ll need the Vortex headphones’ waterproof engineering with ⅛-inch jack connectivity.
The MS-2 MasterSound variant integrates specialized 2-pin underwater AT connector for depth operations.
Each model incorporates noise isolation through closed-ear designs, enabling signal detection in challenging acoustic environments.
TreasureSound headphones deliver essential functionality without premium pricing, giving you budget-conscious access to direct wired connectivity across multiple detector platforms.
The ClearSound Easy Stow features inline volume control for adjustable audio management during detection activities.
The 8 ohms speaker impedance maintains consistent audio performance across varying signal conditions and detector output levels.
Cable-Based Audio Benefits
Beyond connector compatibility and model selection, wired headphones deliver measurable performance advantages that directly impact target signal interpretation.
You’ll receive uncompressed audio data without wireless interference degrading subtle threshold responses or faint target signatures.
The direct physical connection eliminates latency—critical when distinguishing ferrous from non-ferrous signals in real-time sweep patterns.
You won’t experience mid-hunt battery failure or pairing dropouts during critical detection moments.
Connector durability ensures field reliability across multiple detector models without troubleshooting wireless protocols.
The analog signal path preserves full-spectrum audio fidelity that wireless compression often sacrifices, maintaining precise tonal variations between target depths and compositions.
Cost-effectiveness matters when you’re investing in detection equipment—wired models deliver professional-grade performance without battery replacement cycles or wireless feature markup, maximizing your operational freedom.
Submersible and Waterproof Headphone Capabilities
You’ll find Garrett’s submersible headphones rated from 10 feet to 200 feet depth depending on the model series.
The AT Series headphones achieve 200-foot waterproofing through injection-molded seals and work with AT Pro, AT Gold, AT Max, Sea Hunter Mark II, ATX, and Infinium LS detectors.
Vortex Series headphones feature a 3.5mm waterproof jack compatible with VX5, VX7, and VX9 models for both freshwater and saltwater detection.
Depth Ratings and Specifications
You’ll need wired headphones below the surface—wireless Z-Lynk technology doesn’t function submerged.
The AT Pro includes MS-2 wired headphones rated to 10 feet, while the AT Max requires separate wired units for submersion despite its weatherproof wireless MS-3 set.
Padded ear cups enhance ear comfort during extended underwater sessions.
Background noise reduction guarantees you’ll catch target signals clearly, even when fully submerged.
Compatible Detector Models
When selecting headphones for your Garrett detector, connector compatibility determines both land and underwater functionality. Your AT Pro, AT Gold, AT Max, and Sea Hunter Mark II utilize 2-pin connectors, enabling you to deploy Gray Ghost Wireless Headphones for surface operations or Gray Ghost Amphibian II models offering submersible durability down to 30 feet.
The MS-2 Headphones deliver waterproof performance through identical 2-pin architecture. For wireless range advantages, you’ll access MS-3 Z-Lynk systems that eliminate cable constraints on compatible models.
The ATX and Infinium LS support 2-pin wireless configurations, while Vortex series detectors require 1/8-inch connections. You can adapt land-based headphones using Garrett’s 1/4″ adapter on 2-pin platforms.
The Z-Lynk kit provides universal wireless capability across both 2-pin and 1/4″ jack configurations, maximizing your operational flexibility.
Detector Compatibility Across Garrett Models
Garrett’s headphone lineup operates across three distinct connector standards that determine compatibility with specific detector models.
You’ll find 1/4″ jacks on ACE series detectors (200, 250, 300, 400), offering universal compatibility with TreasureSound and ClearSound options. The 2-pin AT connector serves specialized units—AT Pro, AT Gold, AT Max, ATX, Sea Hunter MKII, and Infinium LS—requiring MS-2 or Z-Lynk wireless configurations.
Waterproof features distinguish submersible headphones using 2-position AT connectors for underwater detecting. The Z-Lynk wireless system transcends physical connectors entirely, pairing with any Garrett wireless-enabled detector while eliminating cable restrictions.
Depth limitations don’t apply to wired systems, though pulse induction and VLF compatibility varies by impedance matching. Your 8-ohm-rated headphones maintain signal integrity across detector types, while reinforced coiled cords extend your operational radius to ten feet.
Audio Quality and Frequency Response
The MS-3 Z-Lynk wireless headphones deliver audio across a 30-18,000 Hz bandwidth, capturing the full spectrum of target signals your detector transmits.
You’ll experience high-fidelity sound reproduction through 8-ohm speaker impedance, ensuring superior signal output without degradation.
The integrated volume control lets you adjust signal levels to match your hearing sensitivity, maximizing your ability to detect faint targets in challenging conditions.
Z-Lynk Audio Bandwidth Specifications
Audio bandwidth specifications reveal critical performance differences between Z-Lynk’s wireless transmission system and its headphone models.
The Z-Lynk core system transmits at 20 kHz bandwidth over 2.4 GHz radio frequency, while CS-3 and MS-3 headphones operate within 30-18,000 Hz frequency range. This creates a slight disparity—the transmission exceeds headphone reproduction by 2 kHz on the upper end.
You’ll notice both headphone models maintain identical frequency response parameters, ensuring consistent audio fidelity across your detecting setup. The system covers most of the human audible spectrum (20 Hz-20 kHz), though you’re missing the 20-30 Hz sub-bass range.
Frequency-hopping technology at 2.4 GHz prevents crosstalk interference, delivering cleaner signal separation than competing systems.
Z-Lynk’s 17 ms latency outperforms Bluetooth’s 100+ ms delay by six times, giving you real-time target response without transmission lag.
Premium Sound Quality Delivery
When examining premium audio delivery across Garrett’s headphone lineup, you’ll find speaker impedance standardized at 8 ohms per channel—a specification that directly influences power efficiency and signal clarity from your detector’s output stage.
The MasterSound model extends frequency response from 30-18,000 Hz, capturing both low-frequency iron signals and high-pitched non-ferrous targets.
While Garrett doesn’t employ noise canceling technology, their wireless systems utilize 2.4 GHz transmission protocols rather than standard Bluetooth connectivity for reduced latency—critical when milliseconds matter between target detection and recovery.
Premium Audio Performance Characteristics:
- Full-ear cushions on MS-3 units maximize acoustic isolation without active cancellation
- Mono/Stereo switching adapts signal processing to detection conditions
- Z-Lynk wireless maintains signal fidelity without compression artifacts
- Reinforced coiled cords preserve waveform integrity across extended cable lengths
Volume Control Signal Enhancement
Beyond acoustic isolation and transmission protocols, proper volume calibration fundamentally shapes your detector’s signal-to-noise ratio and target discrimination accuracy.
Your WR1 receiver’s buttons establish maximum output thresholds—set them using a large target like a can, then fine-tune with your headphone’s integrated controls for excellent headphone comfort during extended hunts.
The Axiom’s 0-25 volume range caps oversized target peaks without sacrificing faint signal sensitivity, while threshold adjustment (-9 to 25) adds a barely audible baseline hum that enhances frequency response perception in mineralized ground.
Z-Lynk’s 17-millisecond latency maintains real-time audio correlation with searchcoil positioning, vital for pinpoint accuracy.
The system’s 30-minute auto-off preserves battery life during breaks without resetting your calibrated parameters, ensuring consistent detection performance throughout your session.
Comfort Features for Extended Detecting Sessions
Extended metal detecting sessions demand headphones engineered for sustained comfort, as physical fatigue directly impacts your ability to discern subtle audio signals after hours in the field. Comfort improvements across Garrett’s headphone lineup address the physical demands of unrestricted detecting time.
Critical comfort specifications include:
- Headphone padding: Soft ear cushions on MS-2 and MS-3 models distribute pressure evenly while reducing ambient noise for target isolation.
- Adjustable headbands: Extendable designs accommodate diverse head sizes without creating pressure points during extended wear.
- In-line volume controls: Accessible adjustments eliminate the need to return to your detector for audio modifications.
- Wireless Z-Lynk freedom: Eliminates cord drag and tangling that creates physical restriction over time.
These engineered features maintain your detection accuracy throughout marathon sessions without compromising signal clarity.
Battery Management and Charging Options
Charging methods offer field flexibility through standard micro-USB connections. You’ll achieve full Z-Lynk recharge in 5 hours or less using any USB source—laptop, vehicle port, or power block.
Field-ready charging adapts to your environment—any USB source delivers full power in five hours or less.
Gray Ghost requires up to 4 hours for complete restoration.
Red LED indicators signal active charging, extinguishing upon completion.
Auto power-off functions (30-60 minutes) preserve charge during breaks, extending your operational window without tethering you to wall outlets.
Storage and Portability Considerations
Between detecting sessions, your headphone system demands storage solutions that match its technical capabilities. The ClearSound’s folding mechanism enables flat-pack configuration, while rotating earpieces compress your unit’s footprint by 60%. For wireless systems, the Z-Lynk’s included case protects module integrity during transport.
Optimized headphone storage protocols:
- Fold ClearSound units completely flat before inserting into gear compartments
- Secure WR1 modules in designated cases to prevent connection port damage
- Coil 41-inch cables using over-under technique to eliminate memory kinks
- Position 90-degree connectors away from pressure points in bags
Your portability accessories directly impact field readiness. The adjustable headband compresses for tight spaces, while padded components maintain structural integrity. Water-resistant transmitters tolerate humidity in sealed containers, ensuring your detection capabilities remain unrestricted across environments.
Warranty Coverage and Product Support
Your Garrett detection equipment operates under a thorough 3-year limited warranty that protects ground-search detectors, pinpointers, and searchcoils against factory defects and faulty components. This coverage includes parts and labor when your unit meets performance specifications, though battery failures and unauthorized modifications void protection.
Gray Ghost Wireless headphones carry separate 2-year coverage for original purchasers. Understanding warranty nuances empowers you: obtain an RMA number before shipping equipment, document issues clearly, and contact technical support at 1-800-234-6151 weekdays between 8:00 AM–4:30 PM CST.
You’ll handle return shipping costs on units exceeding 90 days from purchase. All Garrett repairs receive 90-day warranty coverage post-service. Test your equipment immediately upon return to verify functionality and maintain your detecting freedom without interruption.
Frequently Asked Questions
Can I Use Third-Party Headphones With My Garrett Metal Detector?
Yes, you’ll enjoy full headphone compatibility with your Garrett detector. Third-party options won’t compromise performance—they enhance sound quality customization. Choose wired models with 1/4″ or 2-pin connectors, or go wireless with Z-Lynk technology for unrestricted detecting freedom.
How Do I Troubleshoot Audio Issues With My Garrett Headphones?
Check battery power first, then verify headphone cable connections and plug compatibility. Restart your detector to reset wireless pairing. Inspect cables for damage, guarantee firmware’s current with software updates, and perform compatibility checks between your headphones and detector model.
What Happens if I Lose the USB Charging Cable?
Better safe than sorry—you’ll need a USB cable replacement immediately. Order Garrett’s official USB-to-USB Mini cable (PN:9437900) for your MS-3 headphones. Meanwhile, explore charging issue solutions like standard Micro USB extensions as temporary workarounds until your replacement arrives.
Are Replacement Ear Cushions Available for MS-3 Headphones?
Yes, replacement cushions are available for your MS-3 headphones through CentralSound at $24.99. You’ll find three headphone upgrades: Cooling Gel, Ultra Plush, or Protein Leather—all 50% thicker than stock pads for enhanced detection comfort.
Can I Pair Multiple Z-Lynk Headphones to One Detector Simultaneously?
No, you can’t pair multiple Z-Lynk headphones to one detector simultaneously. The wireless compatibility supports one-to-one connections only. Multi headphone setup isn’t possible—the frequency-hopping technology creates dedicated channels between single paired devices, ensuring interference-free operation.
References
- https://garrett.com/sport/
- https://kellycodetectors.com/garrett-ms-3-z-lynk-wireless-headphones/
- https://www.metaldetector.com/products/garrett-submersible-headphones-at-pro-infinium-sea-hunter-mark-ii
- https://garrett.com/garrett-at-max-w-ms-3-wireless-headphones/
- https://seriousdetecting.com/products/garrett-cs-3-z-lynk-wireless-headphones-vortex-at-max-ace-apex-axiom-pro-pointer-at-z-lynk
- https://garrett.com/accessories/headphones/
- https://www.highplainsprospectors.com/products/ms-3-wireless-z-lynk-kit-garrett
- https://detectorpower.com/es/collections/garrett/products/garrett-wireless-headphones-and-module-ms-3-z-lynk
- https://www.garrettnewzealand.co.nz/garrett-z-lynk-wireless-system/
- https://www.metaldetector.com/products/garrett-ms-3-wireless-headphones-with-z-lynk-transmitter-module
