You’ll optimize your Bounty Hunter Quick Draw Pro by setting sensitivity to 75% or below for stable operation, adjusting the discrimination knob clockwise to filter unwanted targets, and configuring volume at level 7 for ideal performance. The factory-configured ground balance eliminates calibration needs, while notch filters let you accept or reject specific metal categories between foil and zinc. Your target ID scale ranges from 0-99, with consistent readings indicating buried treasures and erratic signals suggesting trash. The sections below break down each control’s function and recommended configurations for various hunting conditions.
Key Takeaways
- Set volume at 7 for optimal performance, increasing only in noisy environments for better audio clarity.
- Rotate discrimination knob fully counterclockwise for all-metal mode, or clockwise to filter targets based on conductivity levels.
- Use NOTCH mode to accept or reject specific metal categories (FOIL, 5¢, ALUM, Zn) independently from discrimination settings.
- Set sensitivity at 75% or below for best pinpoint accuracy when locating exact target positions.
- Factory ground balance eliminates manual calibration, automatically compensating for soil mineralization across different environments.
Understanding the Touch-Pad LCD Display and Target ID System
The Quick Draw Pro’s LCD display serves as your command center, translating electromagnetic signals into actionable intelligence about buried targets.
Through intuitive touch pad functionality, you’ll access advanced detection options on the high-resolution screen. The system displays target identification numerically from 0-99, representing electrical conductivity—higher numbers indicate more conductive metals.
Nine category icons classify common targets: iron, foil, nickels, pull tabs, pennies, dimes, and quarters. You’ll notice the illuminated Target Conductivity Arc segment corresponds directly to your numeric ID reading.
Pass your coil repeatedly over objects—buried targets produce consistent readings, while trash generates erratic numbers. This fast-responding system updates continuously, displaying the last detected object’s ID.
The detector features a 10 Elliptical Concentric searchcoil with waterproof construction for versatile use in various conditions.
Combined with 3-tone audio and discrimination settings, you’re equipped to differentiate valuable finds from junk efficiently.
Configuring Sensitivity and Discrimination Controls
Your discrimination techniques start with the right knob fully counterclockwise for all-metal mode.
Rotate clockwise past DISC to filter unwanted targets by conductivity—iron breaks at ID 20, nickels at 35.
Adjust the discrimination dial clockwise to reject iron below ID 20 and nickels below 35 based on target conductivity.
Press the Disc/All Metal touchpad to toggle modes.
High sensitivity near targets triggers overload signals (two display lines), so reduce it to isolate shallow finds without interference.
The NOTCH feature lets you accept or reject individual metal categories like FOIL, 5¢, ALUM, and Zn for more precise filtering.
Gold items typically fall between aluminum and nickel on the conductivity scale, so avoid rejecting targets in this range.
Using Pinpoint Mode for Precise Target Location
To activate pinpoint mode on your Quick Draw Pro, press and hold the pinpoint button to shift the detector into all-metal mode with audio feedback that helps you center the target.
Once you’ve located the strongest signal by moving the coil slowly over the target area, the integrated depth indicator displays graphic measurements for coin-sized objects up to 9 inches deep at sensitivity level 8. The lightweight 2.4-pound design allows you to maintain steady control during pinpoint scanning without experiencing arm fatigue. The pinpoint feature enables precise location tracking of detected objects before you begin digging.
You’ll confirm the exact target position by gradually raising the coil until the signal disappears, then mark that spot for precise excavation.
Activating Pinpoint Mode
When you’ve located a potential target with your Bounty Hunter Quick Draw Pro, press and hold the PP button to activate pinpoint mode for precise location identification. “PP” momentarily appears on the screen, confirming the feature’s engagement.
This mode revolutionizes your detecting experience by delivering pinpoint accuracy without requiring searchcoil motion. Your detector maintains a constant tone over stationary metal targets, streamlining target retrieval and eliminating guesswork.
Key Pinpoint Mode Features:
- V.C.O. audio system adjusts tone intensity based on target proximity
- Loudest sound marks exact target location beneath searchcoil
- Three-tone audio identification differentiates metal types during detection
- Reduces unnecessary digging by pinpointing targets before excavation
- Functions independently from sensitivity settings (1-10 scale)
The pinpoint feature also provides depth indication to help you estimate how deep you’ll need to dig to recover the target. For users experiencing intermittent pinpoint switch issues, latching push button switches can be installed as modifications to lock pinpoint mode in the on position. Master this technique to maximize efficiency and minimize recovery time in the field.
Reading Depth Measurements
The Bounty Hunter Quick Draw Pro’s depth indicator displays probable target depth in inches on the LCD screen, specifically calibrated for coin-sized objects.
You’ll see a 3-segment graphic: one arrow indicates 0-2 inches, two arrows show 2-5 inches, and three arrows represent 5+ inches up to 8-10 inches maximum.
For best depth accuracy, maintain sensitivity at 75% or below. Higher settings often misreport actual depth—a 4-inch reading might actually be 6-8 inches deep.
In pinpoint mode, pass your coil repeatedly over the target, pausing at sweep end to lock the depth measurement. Combine this with the 0-99 numeric display and 3-tone audio for complete target identification.
Sweep from multiple angles to confirm consistent readings. Varying depths suggest multiple targets or trash, guiding your dig-or-pass decisions efficiently. The waterproof searchcoil allows you to use pinpoint mode in shallow water environments while maintaining accurate depth readings. Be aware that depth indicators can be inaccurate for shallow targets, so always verify readings before committing to a dig.
Adjusting Audio and Volume Settings for Different Metal Types
Mastering your Bounty Hunter Quick Draw Pro‘s audio system begins with understanding how its 3-tone classification identifies different metals beneath your searchcoil.
Low tones signal ferrous materials and some gold, medium tones indicate nickel and zinc, while high tones reveal valuable targets like silver quarters. These audio feedback techniques work alongside your Target-ID display for confident target identification.
Essential Volume Adjustment Strategies:
- Set volume at 7 for ideal field performance in standard conditions
- Increase to 8-10 when detecting in noisy outdoor environments
- Use Disc/Notch at 2:00 position in Auto Notch mode for balanced discrimination
- Listen for repeatable low and high tones indicating valuable targets
- Adjust discrimination clockwise to eliminate unwanted metal signals completely
Your freedom to hunt effectively depends on mastering these audio controls for maximum target recovery.
Optimizing Ground Balance and Recovery Speed
The Quick Draw Pro’s factory preset ground balance handles most soil conditions effectively without manual adjustment, saving you setup time in moderately mineralized terrain.
When you encounter highly mineralized areas with false signals, manually rebalancing cancels soil interference and stabilizes target identification.
The detector’s fast signal processing works with optimized ground balance to deliver quick target separation in trashy sites, letting you identify multiple objects during slow, overlapping sweeps.
Preset Ground Balance Benefits
When you power on the Bounty Hunter Quick Draw Pro, its factory-configured ground balance immediately begins filtering mineral interference without requiring calibration steps.
You’ll experience immediate detection capability across standard soil conditions, from dry plains to clay-based terrain. The preset ground balance delivers user advantages by eliminating setup complexity while maintaining target identification accuracy.
Key operational benefits you’ll gain:
- Instant field deployment – Begin hunting immediately without technical adjustments or learning curve delays
- Automatic mineralization compensation – Factory settings distinguish metal targets from ground minerals without your intervention
- Consistent performance – Reliable operation across arid environments, limestone soils, and non-challenging mineralization levels
- Simplified operation – No constant recalibration interrupts your detecting sessions
- Beginner-friendly design – Freedom to focus on treasure hunting rather than technical calibration procedures
Fast Recovery Speed Advantages
After establishing ideal ground balance, your Quick Draw Pro’s recovery speed becomes the critical performance factor that determines target separation capability in challenging environments.
Fast recovery allows your detector to distinguish multiple close targets rather than blending them into confusing single signals. In trashy parks or iron-laden sites, you’ll hear distinct responses from coins positioned near nails instead of averaged tones that mask valuables.
The Quick Draw Pro’s super fast recovery rate processes targets rapidly, resetting between detections without lag. This enables brisk swing speeds that cover more ground efficiently while maintaining target separation in dense areas.
You’ll experience cleaner responses when sweeping through foil, pulltabs, and other junk, with the recovery system isolating good targets that slower detectors would miss entirely in contaminated soil.
Fine-Tuning Notch Filters for Specific Target Detection
While standard discrimination removes broad target ranges, notch filters give you surgical control over individual metal categories on your Quick Draw Pro.
You’ll access four target categories—FOIL, 5¢, ALUM, and Zn—through dedicated notch filter adjustments that operate independently from your DISC settings.
Target category selection requires these operational steps:
- Press left or right arrows to cycle through categories, each flashing for 3 seconds before accepting your choice
- Use the large notch button for instant category acceptance or rejection without menu navigation
- Press Menu four times to reach NOTCH mode when customizing detection parameters
- Monitor the Target Category Arc display to verify which metals remain active or excluded
- Coordinate sensitivity settings (1-10 range) with notch configurations to eliminate false signals while maintaining detection depth
You’ll achieve maximum freedom when hunting specific targets by notching out unwanted metals.
Frequently Asked Questions
How Long Does a 9V Battery Typically Last During Normal Detecting?
Like clockwork, you’ll get 20 to 25 hours of battery lifespan from your 9-volt alkaline during normal use. This reliable detecting performance lets you hunt freely without constantly worrying about power, giving you extended sessions in the field.
Can the Quick Draw Pro Detect in Saltwater or Wet Beach Sand?
You’ll find limited saltwater detection capabilities—the Quick Draw Pro isn’t recommended for wet saltwater beaches due to high conductivity challenges. However, wet sand performance works adequately in shallow depths, though dry beach sand delivers your best results.
What Is the Best Stem Length Adjustment for My Height?
Find your sweet spot: adjust stem length with your arm relaxed at your side, positioning the searchcoil parallel to ground. This height adjustment guarantees you’ll sweep comfortably for hours while maintaining that vital one-inch coil clearance.
How Do I Properly Clean and Maintain the Waterproof Search Coil?
For proper coil maintenance, rinse your waterproof search coil with fresh water after saltwater use, brush debris from seams, dry completely before storage, and perform cleaning techniques like periodically popping off the cover for thorough internal inspection.
Does the Warranty Cover Accidental Damage or Water Intrusion Issues?
No, the warranty coverage explicitly excludes accidental damage and water intrusion into the chassis. You’re only protected against manufacturing defects in materials and workmanship. Dropping your detector or allowing water inside voids your warranty completely.
References
- https://detectorwarehouse.com/products/bounty-hunter-quick-draw-pro-metal-detector-with-pinpoint-mode-and-depth-indication
- https://www.bresser.com/p/bounty-hunter-quick-draw-pro-metal-detector-3410010
- https://www.metaldetector.com/products/bounty-hunter-quick-draw-pro-metal-detector
- https://www.youtube.com/watch?v=Y-sJsF8MmMI
- https://www.academy.com/p/bounty-hunter-quick-draw-pro-metal-detector
- https://detectorpower.com/products/bounty-hunter-quick-draw-pro-metal-detector
- https://modernmetaldetectors.com/products/bounty-hunter-quick-draw-pro-metal-detector-with-5-year-warranty-proqd
- https://www.campingworld.com/bounty-hunter-quick-draw-pro-metal-detector-128415.html
- https://www.highplainsprospectors.com/products/bounty-hunter-quickdraw-pro-metal-detector-with-10-waterproof-search-coil
- https://op2.0ps.us/static/lib/bounty-hunter-quick-draw2.pdf
